 | Clariant's comprehensive line of CESA additive masterbatches offers unprecedented opportunities to improve the properties, performance and quality of finished products, while also optimizing productivity and costs. |
|
|
| Click on link to open up full information |
|
CESA-light (UV Stabilizers)
Light radiation and oxygen in the air trigger decomposition processes in plastics that not only affect their appearance, but also adversely affect their mechanical and physical properties.
CESA-flam (Flame Retardants)
Flame retardant additives make plastics safer by making them more difficult to ignite and by controlling their burning behavior.
CESA-stat (Antistats)
Antistatic agents prevent a buildup of static electricity on polymer surfaces, that can not only attract dust and dirt, but can also cause sheet or film to cling, stacked polystyrene cups to stick and powder to bridge.
CESA-slip & CESA-block (Lubricants and Antiblocking)
Antiblocking and slip agents modify the surface of polymeric sheet or film, making it rougher or more slippery.
| |  |
CESA-grip
Filled polyethylene heavy-duty bags have a tendency to slip and slide when stacked in layers, such as on pallets. The addition of antislip agents improves stackability by roughening the surface of the film, reducing it's slip properties.
CESA-cor (Corrosion Inhibitors)
Typically added to packaging film, corrosion inhibitors protect the appearance and extend the service life of metal parts and components.
CESA-antimicro (Antimicrobials)
Without antimicrobials, bacteria and spores can grow on the surface of plastics, resulting in staining, odor and other undesirable characteristics, including premature product failure.
CESA-nox (Antioxidants)
Antioxidants, often called heat stabilizers, are organic substances that inhibit or retard polymer oxidization and its degrading effects. These include discolorations, change in viscosity, loss of physical properties, loss of clarity, and surface crazing or cracking.
CESA-process (Processing Aids)
LLDPE, LLDPE-rich blends and metallocene resins are often extremely difficult to extrude due to severe problems with melt fracture during processing. Processing aids are designed to coat the inner surface of the extrusion die, reducing friction between the melt and the metal to facilitate processing.
CESA-laser (Laser Marking)
Although several laser sources are used to mark plastics, the most common is the Nd-YAG system. Extremely flexible, it works by scanning or tracing, resulting in an excellent fine and indelible print.
Other Applications
CESA Additive Masterbatches Product Line
Regional Contact Information: |
|
|
|
| |